Tlam SS HTD03
Tlam SS HTD Series
Tlam SS HTD03 is a high temperature thermally conductive Printed Circuit Board (PCB) substrate. The construction consists of a copper circuit layer bonded to an aluminum or copper base plate with 150°C rated Tlam PP HTD03 dielectric. The technology of Tlam system resides in the Tlam HTD03 dielectric which offers excellent thermal resistance and high temperature durability.
Tlam SS HTD03 laminate is processed through standard FR4 print and etch operations.
Tlam SS HTD03 has 6~8 times better thermal conductivity than FR4 to keeping components cool. The Tlam SS HTD03 laminate is processed through standard FR4 print and etch operations and run through standard pick and place SMT and manual wire bond process.
Standard constructions are made with 1 and 2 ounce copper and 0.040 (1mm) and 0.062 (1.6mm) inch thick aluminum. Custom construction of heavier weight circuit copper and thicker aluminum and copper base plate are also available.
• Cost effective solution which allow simplified designs and smaller devices
• High temperature applications
• High glass transition temp for lead free solder compatibility
• UL 746 B RIT of 150?
• RoHS compliant
• Environmentally green
|Additional Product Description||
All properties are typical @ 25°C, unless otherwise specified.
For design engineer guidance only, observed performance varies in application. Engineers are reminded to test the material in application.
Peel strength is measured with 1oz Cu weight.
All properties are based on nominal thickness. The layout and process may require thicker starting Tpreg to meet nominal laminated thickness.
|Applications||• Automotive headlamp
• LED applications
• Power supplies – AD/DC and DC/DC
• Motor drives
|CTE in XY/Z axis||16/36
18/155, < Tg 04-Sep-14, > Tg 18/155
|Capacitance||287 pF/in_ – 45 pF/cm_, at 1 KHz 287|
|Comparative Tracking Index||
|Dielectric Constant Range||
1 kHz 5.1
|Dielectric Strength||1000 (39.3)|
|Dielectric Thickness||0.004 (0.102)|
|Dissipation Factor at 1KHz||0.007|
|Flatness & Parallelism||142|
|Flexural Strength (MPa)||142.00|
|Glass Transition Temperature (°C)||
|Peel Strength||6.5 (1.16)|
|Poisson’s Ratio @ 25/150°C||1 14/263|
|Product Line||Tlam SS HTD Series|
|Solder Float (4 min. @ 288°C)||Pass|
|Soldering Temperature Maximum||288|
|Thermal Conductivity (W/mK)||2.20|
|Thermal Resistance (°C-in²/W)||0.049 (C-in2/Watt)|
|Thickness (mm)||0.003 in (0.076 mm)|
|UL Continuous Operating Temperature (°C)||150|
|Volume Resistivity||Volume Resistivity 150C 200000000000, Volume Resistivity 25C 1400000000000000, Volume Resistivity at 150C 200000000000, Volume Resistivity at 25C 1400000000000000|
|Withstand Voltage (VDC)||1800|
|Youngs Modulus||at 25/150C 1 29/31|
A service that is competitive, responsive and reliable
Our sales team and engineers are happy to work directly on site with clients always providing a personal and direct approach to fulfilling customer needs
- High quality products that are produced in the UK (not China).
- Local Sales team and engineers available 5 days per week.
- Comprehensive back up and after sales service, with an actual technician ready to listen and help on the telephone 5 days a week. (No automated phone queuing system)
- All products are REACH and ROHS compliant.
- A Reliable, discreet and trustworthy partner with a proven track record in design and engineering.
- Very competitive compared to overseas competition.
- A huge reduction in air miles and lead times compared to overseas suppliers.
- Able to deliver to most destinations in the European Union within 24hrs.
NOTICE: The information contained herein is to the best of our knowledge true and accurate. However, since the varied conditions of potential use are beyond our control, all recommendations or suggestions are presented without guarantee or responsibility on our part and users should make their own tests to determine the suitability of our products in any specific situation. This product is sold without warranty either expressed or implied, of fitness for a particular purpose or otherwise, except that this product shall be of standard quality, and except to the extent otherwise stated Techni3’s invoice, quotation, or order acknowledgement. We disclaim any and liability incurred in connection with the use of information contained herein, or otherwise. All risks of such are assumed by the user. Furthermore, nothing contained herein shall be construed as a recommendation to use any process or to manufacture or to use any product in conflict with existing or future patents covering any product or material or its use.